Description
Need a Micro Pen Actuator with Feedback that delivers the premium results you're looking for? The Firgelli Micro Pen has been specifically designed to provide the performance you need, no matter what the nature of your business may be.
Durable, High-grade Components
Each Micro Actuator comprises high-grade components that have been built to a demanding specification and put together by time-served engineers. The result is a premium product that has been designed to deliver highly accurate results, even in challenging conditions.
Created to provide robust, consistent performance, Micro Linear Actuators offer a dependable solution to your design and production requirements, no matter what your operation might be.
Exceptional Performance
If performance matters to you, then look no further than this actuator. Equipped with Hall sensor feedback, that results in an exceptional level of positional control, this Actuator also offers overload protection, which minimizes the risk of unexpected failure when it matters most.
Modest Dimensions for Optimum Versatility
One of the main reasons why a growing number of companies are choosing this Micro Pen Actuator for their operations is its relatively small dimensions - measuring just 16mm in diameter, it's still capable of offering forces up to 50N (11lbs) at the same time as providing stroke lengths up to 100mm (10cm or approximately 3.93701 inches.)
The Micro Pen Actuator With Feedback is Suitable for a Wide Range of Applications
Whether you have a robotics operation and need a suitable Actuator that will deliver the results you're looking for or are involved in some form of consumer electronics, a Micro Pen Actuator with Feedback could be exactly what you're looking for. It's also a good option if your product has hidden flaps or panels that require specialist work.
This Actuator is a versatile piece of equipment that's useful for environments where a high level of accuracy and detail is essential to good results.
To synchronous 2 or more actuators together to run at exactly the same speed, we recommend our Control board FCB-1 for the ultimate Actuator control. This gives you complete actuator control including adjusting limits, speed, and even a series of timer functions to be able to time when an Actuator opens and closes.
| FA-BS16-4-12-(Stroke) | FA-BS16-11-(Stroke) | FA-BS16-22-(Stroke) | |
| Push/Pull Force | 20N (4.5-lbs) | 50N (11-lbs) | 100N (22-lbs) |
| Static Force | 30N (6.75-lbs) | 75N (16.5-lbs) | 140N (33-lbs) |
| Speed at no load | 15mm/sec (0.6”/sec) | 5.8mm/sec (0.22”/sec) | 3mm/sec (0.11”/sec) |
| Voltage | 12V | 12V | 12V |
| Max Current at full load | 0.3A | 0.3A | 0.3A |
| Duty Cycle | 10% | ||
| Operating Temp. Range | 23°F to 149°F (-5°C to 65°C) | ||
| Protection Class | IP66 | ||
| No Load Noise Level | 50-65 dB | ||
| Diameter | (16mm) 0.62" | ||
| Mounting Ends | Plastic O Type | ||
| Screw Type | ACME | ||
| Outer Housing Material | Aluminum T6063 | ||
| Expansion Rod Material | Stainless Steel 304 | ||
| Limit Switch | Built-In non-adjustable | ||
| Feedback | Hall Effect Sensor (x2; 90 degrees phase) | ||
| Repeatability | 0.1mm positional repeatability |
||
| Hall sensor pulses / revolution | 360PPR | ||
| Hall Sensor Pulses / in. | 4 lbs - 508 11 lbs - 920 22 lbs - 1143 |
||
| Hall Sensor Pulses / mm | 4 lbs - 20 11 lbs - 36 22 lbs - 45 |
||
| Feedback Voltage | 5V | ||
| Synchronous Capability | Yes, with a Microcontroller | ||
| Cable Diameter | 0.136" | ||
| Cable Length | 0.5 feet | ||
| Stroke Length |
Retracted Length (Hole to Hole) |
Extended Length (Hole to Hole) |
Weight Gram (Ounce) |
| 20mm (0.78") | 140mm (5.5") | 160mm (6.3") | 49 (1.7) |
| 40mm (1.57") | 160mm (6.3") | 200mm (7.87") | 59 (2.0) |
| 60mm (2.36") | 180mm (7.08") | 240mm (9.44") | 63 (2.22) |
| 80mm (3.14") | 200mm (7.87") | 280mm (11") | 75 (2.64) |
| 100mm (4") | 220mm (8.66") | 320mm (12.59") | 81 (2.85) |
