TV Lift Kits Firgelli Robots Linear Slides Makezilla US Site

Speed Controller for Linear Actuators in both directions

Speed Controller for Linear Actuators in both directions

Firgelli Automations

$45.00 $55.00

Share:

Want to control your Linear Actuator motor or DC gear motor speed? then this is the ideal product to do that. The Firgelli Automation`s speed controller will adjust the speed by adjusting voltage down to as low as 3vdc but still maintain the same current draw for the actuator or motor. 

The speed controller allows you to control the speed of any Firgelli 12V DC actuator and all of our gear motor products.The FA-SC2 can change the speed in both directions via 2 adjustable knobs.

Designed using a motor controller and high frequency Pulse Width Modulation (PWM) you are able to control the speed of your actuator or motor in either direction with minimal impact on the force output. The speed controller will allow you to slow the actuator down, but not increase the speed beyond the speed at which it runs with no controller.

The speed controller is intended to control the speed of one linear actuator or motor. Do not connect two actuators or motors to the same speed controller. The slowest the actuator/motor will run is about 10% of the full speed. Reducing the speed can affect the maximum load the actuator can move.

Includes black case

  • Model # FA-SC2  

  • Power could be DC: 12 ~16VDC .

  • No loan output current : 250mA .

  • Stand-by current in armed state : lower 37 mA

  • Output Voltage: 12 V

  • Output Current: 0 to 10 A

  • Dimensions : 80mm x 70mm x 1.6mm

  • Operating Temperature Range : -40 to + 80 degrees C



Contact Us for Expert Advice

Monday to Friday 9am to 5pm Pacific.

EmailCall 1-866-226-0465