Feedback Rod Linear Actuator

      Feedback Rod Linear Actuator

      CAD
      Model #
      Force
      Stroke
      Quantity
      Bulk Discount

      Save on your order when purchasing our Actuators in large volumes. Discount will be calculated at checkout.

      Min. Quantity Discount
      11 20 % OFF
      31 25 % OFF
      50 30 % OFF
      200 40 % OFF
      qty limit cart limit
      Feedback actuator control using Arduino
      Spec Sheet

      Description

      These Actuators have built in potentiometers inside them so you can determine the position of the actuators at any point in time. The potentiometers are a Bournes 10 turn potentiometer with 10K Ohm resistance

      A good way to connect the Feedback actuators to a feedback reading device we recommend using an Arduino board. 

      Using the Arduino board you would be able to define pre-set positional limits for your actuator which can be ideal for certain applications. 

      For all applications requiring feedback, our Bournes potentiometer equipped linear actuator line is your solution. Offering two variations in the line-up, the 35 lb dynamic force or 150 lb dynamic force linear actuator, your intelligent system for your project just got a lot more versatile. This line is constructed of high grade materials: an aluminum inner and outer tube paired with a zinc alloy housing, resulting in enhanced corrosion resistance for a long service life. As with all of our linear actuators these variations both come equipped with factory built-in limit switches as well as a clevis mounting point on each end to ensure easy fitment. The potentiometer feedback runs on a 10K ohm 3-wire system, and the linear actuator is controlled by a two wire system where reversing the polarity will retract the actuator; this system is easily wired to circuit boards for intelligent control, as well as relays, switches, and more.

      The Feedback Rod Actuator Line uses the MB1 Mounting Brackets

      Specifications
      Model FA-PO-35-12-XX FA-PO-150-12-XX

      FA-PO-240-12-XX

      Dynamic Force 35 lb 150 lb 200 lb
      Static Force 70 lb 300 lb  400 lb
      Speed ("/S) 2" 0.5" 0.3"
      Gear Ratio 5:1 20:1 30:1
      Duty Cycle 20% at 100% load, 50% at 25% of load, Max 5mins continuous use
      IP Rating 54
      Screw Acme Screw
      Thread Diameter 12mm
      Clevis Ends 6.3mm diameter
      Input 12v DC
      Max Draw 5 A
      Operational Temperature 0°C - 40°C 
      Limit Switch Built-in (factory preset)
      Safety Certifications CE, ROHS
      Bracket(s) MB1 and/or MB6
      Feedback

      10K ohm 3-wire potentiometer

      Linearity +/- 0.25%

      10 Turn Potentiometer

      Power rating 1-1.5W

      Stroke Retracted Length Extended Length Weight
      2" 7.9" 9.9" 2.7 lbs
      4" 9.9" 13.9" 2.9 lbs
      6" 11.9" 17.9" 3.1 lbs
      8" 13.9" 21.9" 3.4 lbs
      12" 17.9" 29.9" 3.85 lbs

       Technical Drawings

      Control Board Wiring

      All feedback actuators are compatible with the Actuonix Linear Actuator Control board, also known as the LAC board. More information can be found by following this link. as well as an Arduino board

      Product Video
      Comparison Video